Flexible Silicone Neon

F N IG

Q: What is the FXN In-Ground designed for?

It is a recessed, drive-over silicone neon for floor-level and in-ground installations.

Q: What are the FXN In-Ground's dimensions and lengths?

It measures 92 mm wide × 61 mm high , in 500 mm and 1000 mm lengths.

Q: What ingress and impact ratings does the FXN In-Ground carry?

It is rated IP68 and IK10 for immersion and heavy impact.

Q: What is the FXN In-Ground's minimum bend diameter?

Its minimum bending diameter is Ø1200 mm (horizontal and vertical).

Q: What colours and white temperatures does the FXN In-Ground offer?

It is available in White only, at 2100K, 3000K, 4000K or 5000K .

Q: What are the FXN In-Ground's control protocols, power and output?

It runs on X-Stream, DMX or SPI , draws 12 W/m , and delivers >500 lm/m at 12 px/m.

Q: What temperature range does the FXN In-Ground tolerate?

It operates from −40°C to +55°C .

The FXN In-Ground is an IP68-rated linear LED built to live flush with pavements and driveways. Its metal housing and silicone optic shrug off traffic and standing water while delivering dot-free RGBW and white light — with no dark joints between runs.

Colour RGBW · White
Pixel 12 px/m
Build IP68 · IK10 · Silicone
Control X-Stream · DMX · SPI

Configure Your Product View Specifications

1 / 6

Specifications Downloads Accessories Configurator FAQs

Key Specifications — FXN IG In-Ground

Electrical
Power Consumption	12 W/m
Operating Voltage	24 V DC
Operating Temperature	−40°C to +55°C (−40°F to +131°F)
Physical
Fixture Dimensions	(L) 500 mm · 1000 mm × (W) 92 mm × (H) 61 mm
Min. Bending Diameter	Ø1200 mm (Horizontal & Vertical)
Unit / m (Pixel Qty)	12 px/m
LEDs Qty / m	70 LEDs/m · 90 LEDs/m
Optical
Beam Angle	120°
Colour Range
White CCT	2100K 3000K 4000K 5000K
Total Lumens	>500 lm/m
Control
Control Protocols	X-Stream DMX SPI
Ratings
Protection Ratings	IP68 IK10

Note: Standard specification summary for quick evaluation. Exact electrical values vary by colour option and power supply configuration. Contact us for full datasheet and variant-specific performance data.

FXN IG minimum bending diameter — Min. Bending Diameter

Profile Dimensions

Downloads

FXN IG In-Ground Downloads

Accessories

FXN IG In-Ground Accessories

Connectors 1

Silicone Injection-moulded Connector (IP68) Outdoor-ready, fully sealed connector for durability.

Product Configurator

Interactive Configurator

Configure FXN IG for Your Project

Fine-tune colour option, control protocol, and finish, then generate a build-ready FXN IG configuration for your installation.

Live 3D Preview
Rule-Validated Options
Instant Part Number

Frequently Asked Questions

7 Questions

Common questions, answered.

What is the FXN In-Ground designed for?

It is a recessed, drive-over silicone neon for floor-level and in-ground installations.

What are the FXN In-Ground's dimensions and lengths?

It measures 92 mm wide × 61 mm high, in 500 mm and 1000 mm lengths.

What ingress and impact ratings does the FXN In-Ground carry?

It is rated IP68 and IK10 for immersion and heavy impact.

What is the FXN In-Ground's minimum bend diameter?

Its minimum bending diameter is Ø1200 mm (horizontal and vertical).

What colours and white temperatures does the FXN In-Ground offer?

It is available in White only, at 2100K, 3000K, 4000K or 5000K.

What are the FXN In-Ground's control protocols, power and output?

It runs on X-Stream, DMX or SPI, draws 12 W/m, and delivers >500 lm/m at 12 px/m.

What temperature range does the FXN In-Ground tolerate?

It operates from −40°C to +55°C.